BSA 58-DP-RH - Door Pillar Sub-Assembly, RH, Type 1
Land-Rover Series 2
Manufactured to order.
Door Pillar Sub-Assembly, RH, Type 1
First type Right Hand Side Door Pillar Sub-Assembly used on early Series 2 models where wings (fenders) are attached using captive square nuts held inside the door pillar with special cages. Door hinges are attached using square nuts and floating captive plate.
This is the complete Door Pillar Sub-Assembly, comprising:
Captive Nuts and Cages for Wing or Fender x 4
Captive Nut Plate for Lower Door Hinge
Bridge Piece to trap Captive Nut Plate
Tube for Dash to Chassis Tie Bolt
Dash to chassis foot is now supplied separately from the lower stiffener to allow 100% accurate fitment. Foot is fillet welded to stiffener once jigged in position.
Pegasus Parts Door Pillars are manufactured to the orginal specification, i.e. with full height 'gutter' for the lower door weather seal, including the double bend at the vehicle waist.
Pegasus are the only manufacturers of the correct early type door pillar.