PSK 1312 - Ignition and Steering Lock Kit, 2¼ Petrol RHD and 2.6 LHD
Land-Rover Series 3
Serviceable exchange unit required - Order as normal, ignore Out of Stock message
Ignition and Steering Lock Kit, 2¼ Petrol RHD and 2.6 LHD
Replacement steering lock and ignition switch, suitable only for:
Series 3, 2¼ Petrol, RHD models only with Zenith carburettor.
Series 3, 2.6 6-cylinder, LHD models only.
This is the correct type with the die-casting for the Choke Control Cable integral to the main body casting.
To simplify production and customer purchasing we now supply this kit as a complete assembly with new choke cable, clamp and shear bolts.
Steering Lock and Ignition Switch.
Shear Bolts x 2.
Ignition Key x 2
Please note that if fitting to 4-cylinder models, the choke cable supplied is for fitting to the original Zenith carburettor. If the vehicle is fitted with an aftermarket carburettor such as a Weber, please purchase the 109 V8 equivalent kit, PSK 1310, which has a longer choke cable.
PLEASE READ CAREFULLY:
1. Due to the unavailability of some of the internal components, we can only offer these units on an exchange basis.
2. Either place order as normal and send your old Steering Lock to our office address as it appears on the checkout page.
3. Or, if you do not have an old unit to send us, or if you want to keep the vehicle mobile until the new lock arrives, you will need to pay a £50.00 surcharge.
4. Surcharge will be refunded upon receipt of acceptable old unit.
5. To pay the surcharge, purchase this item:Surcharge
'acceptable old unit' means a Land-Rover 'Lowe & Fletcher' lock, not the very early Britax type or the later Defender type.
Significant exterior damage caused during removal or attempted removal is usually acceptable. It is some of the interior parts we are concerned about.