BPK 3-109-4-R-1 - Brake Pipe and Hose Kit, 109", RHD, Series 3, up to June 1980, Basic 4-cylinder model Land-Rover Series 3 £96.90 Quantity: at £96.90 each Out of Stock Out of stock. Brake Pipe and Hose Kit, 109", RHD, Series 3, up to June 1980, Basic 4-cylinder model Suitable only for Series 3, 109" RHD models with single exhaust silencer up to June 1980, Basic 4-cylinder model. 'Basic' means NOT Station Wagon model, i.e. Full Hard Top, Truck Cab or Full Soft Top models. Suitable only for early Series 3 models with flexible brake hoses and brass 4-way and 3-way connectors with UNF threads. All brake pipes are cupro-nickel alloy with solid brass unions. Short pipes are pre-formed on our tooling and jigs. Long pipes are supplied coiled. Complete brake pipe and hose kit comprising: Brake Hose, Plastic Reservoir to Brake Pipe. Brake Pipe, Hose to Brake Master Cylinder. Brake Pipe, Master Cylinder to 4-way connector. Brake Pipe, Connector to LH Front Flexible Hose. Brake Hose for Front LH side. Brake Pipe, LH Flexible Hose to LH Wheel Cylinder. Brake Pipe, Connector to RH Front Flexible Hose. Brake Hose for Front RH Side. Brake Pipe, RH Flexible Hose to RH Wheel Cylinder. Brake Pipe, Connector to Rear Flexible Hose. Brake Hose for Rear Pipes. Brake Pipe, Rear Connector to LH Rear Wheel Cylinder. Brake Pipe, Rear Connector to RH Rear Wheel Cylinder. Half Nut for Flexible Hose x 3 off. Spring Washer for Flexible Hose x 3 off. Sealing Washer, Flexible Hose to Rear Connector x 1 off. Each 3/16" pipe is labelled with its part number and position to simplify fitting.