PSK 1316 - Ignition and Steering Lock, 2¼ Diesel, LHD only Land-Rover Series 3 £191.00 Quantity: at £191.00 each Out of Stock Serviceable exchange unit required - Order as normal, ignore Out of Stock message Steering Lock, 2¼ Diesel, LHD only. This is the correct type with the die-casting for the Engine Stop Control Cable integral to the main body casting. These new manufactured locks do not have the stop cable interlock. Pulling the stop cable will close off the fuel supply, releasing the cable will return the knob to the start position. To simplify production and customer purchasing we now supply this kit as a complete assembly with new stop cable, clamp and shear bolts. Kit comprises: Steering Lock and Switch. Clamp. Shear Bolts x 2. Engine Stop Cable. Starter Key x 2 PLEASE READ CAREFULLY: 1. Due to the unavailability of some of the internal components, we can only offer these units on an exchange basis. 2. Either place order as normal and send your old Steering Lock to our office address as it appears on the checkout page. 3. Or, if you do not have an old unit to send us, or if you want to keep the vehicle mobile until the new lock arrives, you will need to pay a £50.00 surcharge. 4. Surcharge will be refunded upon receipt of acceptable old unit. 5. To pay the surcharge, purchase this item: Surcharge 'acceptable old unit' means a Land-Rover 'Lowe & Fletcher' lock, not the very early Britax type or the later Defender type. Significant exterior damage caused during removal or attempted removal is usually acceptable. It is some of the interior parts we are concerned about. Manufactured by Pegasus Parts.